Jan 2, 2020

Flashing Method iPhone 5C Clone

  Admin       Jan 2, 2020

Why the iPhone 5C Clone Flashing?

You may upgrade or downgrade the iPhone 5C Clone firmware with Flashing Method iPhone 5C Clone device. Flashing will fix software issues, IMEI related issues and improve iPhone 5C Clone performance. After Flashing, delete the all your iPhone 5C Clone data like photos, contacts, and apps, etc.


What is iPhone 5C Clone Flashing?

iPhone 5C Clone Flashing means removing present stock firmware (Flash File) from iPhone 5C Clone device and replace with the same version or any other version. Simply, iPhone 5C Clone flashing means changing the OS (operating system). You can flash your iPhone 5C Clone with Recovery mode or Flash tool.

Read the two iPhone 5C Clone flashing method 1st Recovery Mode and 2nd flashing with Flash Tool. iPhone 5C Clone flashing method dependent the what type of flash file use.


1st Method Recovery Mode

You Flashing iPhone 5C Clone device without software, don’t need any flash tool or any USB drivers or Computer to flash the firmware of iPhone 5C Clone with this method. Just you need a flash file for iPhone 5C Clone.


Recovery mode with flashing: Follow these steps to flash iPhone 5C Clone stock firmware with recovery mode.

1) First, download the iPhone 5C Clone flash file and Move the Firmware to SD card storage (Do not put the file in the iPhone 5C Clone folder).

2) Remove SD card from the iPhone 5C Clone phone and Power off your iPhone 5C Clone, by holding the power button.

3) Hold down the Volume Up + Power Button or Volume Down + Power Button, After that, Release both Buttons for iPhone 5C Clone device when you see LOGO appears.

4) you will see the Android exclamation mark to the iPhone 5C Clone screen. Now, While holding down the Power key press and release Volume Up key. Navigate with Volume key to select wipe data/factory reset option and press the Power Button for iPhone 5C Clone android. see the Hard Reset - Wipe data/factory reset option.

5) Afterward, use the Volume key to select an option YES and press Power key to confirm. then, select the reboot system now option.

6) Now, insert the sd-card to iPhone 5C Clone. then, again go to the recovery mode and select Apply update from SD-card option.

7) Locate the Downloaded Firmware file from SD-card Storage. Afterward, select and Tap on the Firmware and install it to iPhone 5C Clone. You have successfully flash the Firmware file.


2nd Method Flashing with Flash Tool

Stock ROM Flashing with software, you need a Computer or Laptop, flash tool, USB drivers with a USB cable, iPhone 5C Clone device flash file, and to flashing with this method.

All data will be deleted after flashing for iPhone 5C Clone, so back up all personal data like photos, apps, and contacts, etc to prevent data loss to the iPhone 5C Clone model.


Follow these steps to flash your iPhone 5C Clone Android with flash tool.

1: First, download the flash tool, iPhone 5C Clone flash file, and USB drivers on your computer. Then, Install the USB drivers for your iPhone 5C Clone phone.

2: Next, launch Flash tool on your PC. Afterward, switch off your iPhone 5C Clone device.

3: Now, press and hold the device Volume Up + Power Button or Volume Down + Power Button key. After that, Connect your iPhone 5C Clone to the computer with a USB cable.

4: So, browse the iPhone 5C Clone flash file in the flash tool and click on the Download button. After that, flashing starts on your iPhone 5C Clone phone. Flashing Method iPhone 5C Clone takes 10 to 15 minutes.

5) Please wait until iPhone 5C Clone flashing completed. Afterward flashing completed, Your iPhone 5C Clone device automatically rebooted. Flashing done on your iPhone 5C Clone. Finally, remove the device from the PC.




See the other topic: | Apple | | Root | | Unlock | | Rom | | OS |

If this iPhone 5C Clone phone Flashing option does not work then flow the others post or find the iPhone 5C Clone model-based Flashing method.

logoblog

Thanks for reading Flashing Method iPhone 5C Clone

Previous
« Prev Post