Flashing Method iPhone IX Clone [FlashFile.org]

Flashing Method iPhone IX Clone

- Page for Flashing Method iPhone IX Clone tips and tricks:

Why the iPhone IX Clone Flashing?

You may upgrade or downgrade the iPhone IX Clone firmware with Flashing Method iPhone IX Clone device. Flashing will fix software issues, IMEI related issues and improve iPhone IX Clone performance. After Flashing, delete the all your iPhone IX Clone data like photos, contacts, and apps, etc.

What is iPhone IX Clone Flashing?

iPhone IX Clone Flashing means removing present stock firmware (Flash File) from iPhone IX Clone device and replace with the same version or any other version. Simply, iPhone IX Clone flashing means changing the OS (operating system). You can flash your iPhone IX Clone with Recovery mode or Flash tool.

Read the two iPhone IX Clone flashing method 1st Recovery Mode and 2nd flashing with Flash Tool. iPhone IX Clone flashing method dependent the what type of flash file use.

1st Method Recovery Mode

You Flashing iPhone IX Clone device without software, don’t need any flash tool or any USB drivers or Computer to flash the firmware of iPhone IX Clone with this method. Just you need a flash file for iPhone IX Clone.

Recovery mode with flashing: Follow these steps to flash iPhone IX Clone stock firmware with recovery mode.

1) First, download the iPhone IX Clone flash file and Move the Firmware to SD card storage (Do not put the file in the iPhone IX Clone folder).

2) Remove SD card from the iPhone IX Clone phone and Power off your iPhone IX Clone, by holding the power button.

3) Hold down the Volume Up + Power Button or Volume Down + Power Button, After that, Release both Buttons for iPhone IX Clone device when you see LOGO appears.

4) you will see the Android exclamation mark to the iPhone IX Clone screen. Now, While holding down the Power key press and release Volume Up key. Navigate with Volume key to select wipe data/factory reset option and press the Power Button for iPhone IX Clone android. see the Hard Reset - Wipe data/factory reset option.

5) Afterward, use the Volume key to select an option YES and press Power key to confirm. then, select the reboot system now option.

6) Now, insert the sd-card to iPhone IX Clone. then, again go to the recovery mode and select Apply update from SD-card option.

7) Locate the Downloaded Firmware file from SD-card Storage. Afterward, select and Tap on the Firmware and install it to iPhone IX Clone. You have successfully flash the Firmware file.

2nd Method Flashing with Flash Tool

Stock ROM Flashing with software, you need a Computer or Laptop, flash tool, USB drivers with a USB cable, iPhone IX Clone device flash file, and to flashing with this method.

All data will be deleted after flashing for iPhone IX Clone, so back up all personal data like photos, apps, and contacts, etc to prevent data loss to the iPhone IX Clone model.

Follow these steps to flash your iPhone IX Clone Android with flash tool.

1: First, download the flash tool, iPhone IX Clone flash file, and USB drivers on your computer. Then, Install the USB drivers for your iPhone IX Clone phone.

2: Next, launch Flash tool on your PC. Afterward, switch off your iPhone IX Clone device.

3: Now, press and hold the device Volume Up + Power Button or Volume Down + Power Button key. After that, Connect your iPhone IX Clone to the computer with a USB cable.

4: So, browse the iPhone IX Clone flash file in the flash tool and click on the Download button. After that, flashing starts on your iPhone IX Clone phone. Flashing Method iPhone IX Clone takes 10 to 15 minutes.

5) Please wait until iPhone IX Clone flashing completed. Afterward flashing completed, Your iPhone IX Clone device automatically rebooted. Flashing done on your iPhone IX Clone. Finally, remove the device from the PC.

See the other topic: | Apple | | Root | | Unlock | | Rom | | OS |

If this iPhone IX Clone phone Flashing option does not work then flow the others post or find the iPhone IX Clone model-based Flashing method.