Flashing Method Smile Z9 [FlashFile.org]

Flashing Method Smile Z9

- Page for Flashing Method Smile Z9 tips and tricks:

Why the Smile Z9 Flashing?

You may upgrade or downgrade the Smile Z9 firmware with Flashing Method Smile Z9 device. Flashing will fix software issues, IMEI related issues and improve Smile Z9 performance. After Flashing, delete the all your Smile Z9 data like photos, contacts, and apps, etc.


What is Smile Z9 Flashing?

Smile Z9 Flashing means removing present stock firmware (Flash File) from Smile Z9 device and replace with the same version or any other version. Simply, Smile Z9 flashing means changing the OS (operating system). You can flash your Smile Z9 with Recovery mode or Flash tool.

Read the two Smile Z9 flashing method 1st Recovery Mode and 2nd flashing with Flash Tool. Smile Z9 flashing method dependent the what type of flash file use.


1st Method Recovery Mode

You Flashing Smile Z9 device without software, don’t need any flash tool or any USB drivers or Computer to flash the firmware of Smile Z9 with this method. Just you need a flash file for Smile Z9.


Recovery mode with flashing: Follow these steps to flash Smile Z9 stock firmware with recovery mode.

1) First, download the Smile Z9 flash file and Move the Firmware to SD card storage (Do not put the file in the Smile Z9 folder).

2) Remove SD card from the Smile Z9 phone and Power off your Smile Z9, by holding the power button.

3) Hold down the Volume Up + Power Button or Volume Down + Power Button, After that, Release both Buttons for Smile Z9 device when you see LOGO appears.

4) you will see the Android exclamation mark to the Smile Z9 screen. Now, While holding down the Power key press and release Volume Up key. Navigate with Volume key to select wipe data/factory reset option and press the Power Button for Smile Z9 android. see the Hard Reset - Wipe data/factory reset option.

5) Afterward, use the Volume key to select an option YES and press Power key to confirm. then, select the reboot system now option.

6) Now, insert the sd-card to Smile Z9. then, again go to the recovery mode and select Apply update from SD-card option.

7) Locate the Downloaded Firmware file from SD-card Storage. Afterward, select and Tap on the Firmware and install it to Smile Z9. You have successfully flash the Firmware file.


2nd Method Flashing with Flash Tool

Stock ROM Flashing with software, you need a Computer or Laptop, flash tool, USB drivers with a USB cable, Smile Z9 device flash file, and to flashing with this method.

All data will be deleted after flashing for Smile Z9, so back up all personal data like photos, apps, and contacts, etc to prevent data loss to the Smile Z9 model.


Follow these steps to flash your Smile Z9 Android with flash tool.

1: First, download the flash tool, Smile Z9 flash file, and USB drivers on your computer. Then, Install the USB drivers for your Smile Z9 phone.

2: Next, launch Flash tool on your PC. Afterward, switch off your Smile Z9 device.

3: Now, press and hold the device Volume Up + Power Button or Volume Down + Power Button key. After that, Connect your Smile Z9 to the computer with a USB cable.

4: So, browse the Smile Z9 flash file in the flash tool and click on the Download button. After that, flashing starts on your Smile Z9 phone. Flashing Method Smile Z9 takes 10 to 15 minutes.

5) Please wait until Smile Z9 flashing completed. Afterward flashing completed, Your Smile Z9 device automatically rebooted. Flashing done on your Smile Z9. Finally, remove the device from the PC.




See the other topic: | Apple | | Root | | Unlock | | Rom | | OS |

If this Smile Z9 phone Flashing option does not work then flow the others post or find the Smile Z9 model-based Flashing method.