Flashing Method Xplay i6S Plus [FlashFile.org]

Flashing Method Xplay i6S Plus

- Page for Flashing Method Xplay i6S Plus tips and tricks:

Why the Xplay i6S Plus Flashing?

You may upgrade or downgrade the Xplay i6S Plus firmware with Flashing Method Xplay i6S Plus device. Flashing will fix software issues, IMEI related issues and improve Xplay i6S Plus performance. After Flashing, delete the all your Xplay i6S Plus data like photos, contacts, and apps, etc.


What is Xplay i6S Plus Flashing?

Xplay i6S Plus Flashing means removing present stock firmware (Flash File) from Xplay i6S Plus device and replace with the same version or any other version. Simply, Xplay i6S Plus flashing means changing the OS (operating system). You can flash your Xplay i6S Plus with Recovery mode or Flash tool.

Read the two Xplay i6S Plus flashing method 1st Recovery Mode and 2nd flashing with Flash Tool. Xplay i6S Plus flashing method dependent the what type of flash file use.


1st Method Recovery Mode

You Flashing Xplay i6S Plus device without software, don’t need any flash tool or any USB drivers or Computer to flash the firmware of Xplay i6S Plus with this method. Just you need a flash file for Xplay i6S Plus.


Recovery mode with flashing: Follow these steps to flash Xplay i6S Plus stock firmware with recovery mode.

1) First, download the Xplay i6S Plus flash file and Move the Firmware to SD card storage (Do not put the file in the Xplay i6S Plus folder).

2) Remove SD card from the Xplay i6S Plus phone and Power off your Xplay i6S Plus, by holding the power button.

3) Hold down the Volume Up + Power Button or Volume Down + Power Button, After that, Release both Buttons for Xplay i6S Plus device when you see LOGO appears.

4) you will see the Android exclamation mark to the Xplay i6S Plus screen. Now, While holding down the Power key press and release Volume Up key. Navigate with Volume key to select wipe data/factory reset option and press the Power Button for Xplay i6S Plus android. see the Hard Reset - Wipe data/factory reset option.

5) Afterward, use the Volume key to select an option YES and press Power key to confirm. then, select the reboot system now option.

6) Now, insert the sd-card to Xplay i6S Plus. then, again go to the recovery mode and select Apply update from SD-card option.

7) Locate the Downloaded Firmware file from SD-card Storage. Afterward, select and Tap on the Firmware and install it to Xplay i6S Plus. You have successfully flash the Firmware file.


2nd Method Flashing with Flash Tool

Stock ROM Flashing with software, you need a Computer or Laptop, flash tool, USB drivers with a USB cable, Xplay i6S Plus device flash file, and to flashing with this method.

All data will be deleted after flashing for Xplay i6S Plus, so back up all personal data like photos, apps, and contacts, etc to prevent data loss to the Xplay i6S Plus model.


Follow these steps to flash your Xplay i6S Plus Android with flash tool.

1: First, download the flash tool, Xplay i6S Plus flash file, and USB drivers on your computer. Then, Install the USB drivers for your Xplay i6S Plus phone.

2: Next, launch Flash tool on your PC. Afterward, switch off your Xplay i6S Plus device.

3: Now, press and hold the device Volume Up + Power Button or Volume Down + Power Button key. After that, Connect your Xplay i6S Plus to the computer with a USB cable.

4: So, browse the Xplay i6S Plus flash file in the flash tool and click on the Download button. After that, flashing starts on your Xplay i6S Plus phone. Flashing Method Xplay i6S Plus takes 10 to 15 minutes.

5) Please wait until Xplay i6S Plus flashing completed. Afterward flashing completed, Your Xplay i6S Plus device automatically rebooted. Flashing done on your Xplay i6S Plus. Finally, remove the device from the PC.




See the other topic: | Apple | | Root | | Unlock | | Rom | | OS |

If this Xplay i6S Plus phone Flashing option does not work then flow the others post or find the Xplay i6S Plus model-based Flashing method.