Flashing Method Ziox Astra 4G [FlashFile.org]

Flashing Method Ziox Astra 4G

- Page for Flashing Method Ziox Astra 4G tips and tricks:

Why the Ziox Astra 4G Flashing?

You may upgrade or downgrade the Ziox Astra 4G firmware with Flashing Method Ziox Astra 4G device. Flashing will fix software issues, IMEI related issues and improve Ziox Astra 4G performance. After Flashing, delete the all your Ziox Astra 4G data like photos, contacts, and apps, etc.


What is Ziox Astra 4G Flashing?

Ziox Astra 4G Flashing means removing present stock firmware (Flash File) from Ziox Astra 4G device and replace with the same version or any other version. Simply, Ziox Astra 4G flashing means changing the OS (operating system). You can flash your Ziox Astra 4G with Recovery mode or Flash tool.

Read the two Ziox Astra 4G flashing method 1st Recovery Mode and 2nd flashing with Flash Tool. Ziox Astra 4G flashing method dependent the what type of flash file use.


1st Method Recovery Mode

You Flashing Ziox Astra 4G device without software, don’t need any flash tool or any USB drivers or Computer to flash the firmware of Ziox Astra 4G with this method. Just you need a flash file for Ziox Astra 4G.


Recovery mode with flashing: Follow these steps to flash Ziox Astra 4G stock firmware with recovery mode.

1) First, download the Ziox Astra 4G flash file and Move the Firmware to SD card storage (Do not put the file in the Ziox Astra 4G folder).

2) Remove SD card from the Ziox Astra 4G phone and Power off your Ziox Astra 4G, by holding the power button.

3) Hold down the Volume Up + Power Button or Volume Down + Power Button, After that, Release both Buttons for Ziox Astra 4G device when you see LOGO appears.

4) you will see the Android exclamation mark to the Ziox Astra 4G screen. Now, While holding down the Power key press and release Volume Up key. Navigate with Volume key to select wipe data/factory reset option and press the Power Button for Ziox Astra 4G android. see the Hard Reset - Wipe data/factory reset option.

5) Afterward, use the Volume key to select an option YES and press Power key to confirm. then, select the reboot system now option.

6) Now, insert the sd-card to Ziox Astra 4G. then, again go to the recovery mode and select Apply update from SD-card option.

7) Locate the Downloaded Firmware file from SD-card Storage. Afterward, select and Tap on the Firmware and install it to Ziox Astra 4G. You have successfully flash the Firmware file.


2nd Method Flashing with Flash Tool

Stock ROM Flashing with software, you need a Computer or Laptop, flash tool, USB drivers with a USB cable, Ziox Astra 4G device flash file, and to flashing with this method.

All data will be deleted after flashing for Ziox Astra 4G, so back up all personal data like photos, apps, and contacts, etc to prevent data loss to the Ziox Astra 4G model.


Follow these steps to flash your Ziox Astra 4G Android with flash tool.

1: First, download the flash tool, Ziox Astra 4G flash file, and USB drivers on your computer. Then, Install the USB drivers for your Ziox Astra 4G phone.

2: Next, launch Flash tool on your PC. Afterward, switch off your Ziox Astra 4G device.

3: Now, press and hold the device Volume Up + Power Button or Volume Down + Power Button key. After that, Connect your Ziox Astra 4G to the computer with a USB cable.

4: So, browse the Ziox Astra 4G flash file in the flash tool and click on the Download button. After that, flashing starts on your Ziox Astra 4G phone. Flashing Method Ziox Astra 4G takes 10 to 15 minutes.

5) Please wait until Ziox Astra 4G flashing completed. Afterward flashing completed, Your Ziox Astra 4G device automatically rebooted. Flashing done on your Ziox Astra 4G. Finally, remove the device from the PC.




See the other topic: | Apple | | Root | | Unlock | | Rom | | OS |

If this Ziox Astra 4G phone Flashing option does not work then flow the others post or find the Ziox Astra 4G model-based Flashing method.