Jan 2, 2020

Flashing Method Ziox ZI7

  Admin       Jan 2, 2020

Why the Ziox ZI7 Flashing?

You may upgrade or downgrade the Ziox ZI7 firmware with Flashing Method Ziox ZI7 device. Flashing will fix software issues, IMEI related issues and improve Ziox ZI7 performance. After Flashing, delete the all your Ziox ZI7 data like photos, contacts, and apps, etc.

What is Ziox ZI7 Flashing?

Ziox ZI7 Flashing means removing present stock firmware (Flash File) from Ziox ZI7 device and replace with the same version or any other version. Simply, Ziox ZI7 flashing means changing the OS (operating system). You can flash your Ziox ZI7 with Recovery mode or Flash tool.

Read the two Ziox ZI7 flashing method 1st Recovery Mode and 2nd flashing with Flash Tool. Ziox ZI7 flashing method dependent the what type of flash file use.

1st Method Recovery Mode

You Flashing Ziox ZI7 device without software, don’t need any flash tool or any USB drivers or Computer to flash the firmware of Ziox ZI7 with this method. Just you need a flash file for Ziox ZI7.

Recovery mode with flashing: Follow these steps to flash Ziox ZI7 stock firmware with recovery mode.

1) First, download the Ziox ZI7 flash file and Move the Firmware to SD card storage (Do not put the file in the Ziox ZI7 folder).

2) Remove SD card from the Ziox ZI7 phone and Power off your Ziox ZI7, by holding the power button.

3) Hold down the Volume Up + Power Button or Volume Down + Power Button, After that, Release both Buttons for Ziox ZI7 device when you see LOGO appears.

4) you will see the Android exclamation mark to the Ziox ZI7 screen. Now, While holding down the Power key press and release Volume Up key. Navigate with Volume key to select wipe data/factory reset option and press the Power Button for Ziox ZI7 android. see the Hard Reset - Wipe data/factory reset option.

5) Afterward, use the Volume key to select an option YES and press Power key to confirm. then, select the reboot system now option.

6) Now, insert the sd-card to Ziox ZI7. then, again go to the recovery mode and select Apply update from SD-card option.

7) Locate the Downloaded Firmware file from SD-card Storage. Afterward, select and Tap on the Firmware and install it to Ziox ZI7. You have successfully flash the Firmware file.

2nd Method Flashing with Flash Tool

Stock ROM Flashing with software, you need a Computer or Laptop, flash tool, USB drivers with a USB cable, Ziox ZI7 device flash file, and to flashing with this method.

All data will be deleted after flashing for Ziox ZI7, so back up all personal data like photos, apps, and contacts, etc to prevent data loss to the Ziox ZI7 model.

Follow these steps to flash your Ziox ZI7 Android with flash tool.

1: First, download the flash tool, Ziox ZI7 flash file, and USB drivers on your computer. Then, Install the USB drivers for your Ziox ZI7 phone.

2: Next, launch Flash tool on your PC. Afterward, switch off your Ziox ZI7 device.

3: Now, press and hold the device Volume Up + Power Button or Volume Down + Power Button key. After that, Connect your Ziox ZI7 to the computer with a USB cable.

4: So, browse the Ziox ZI7 flash file in the flash tool and click on the Download button. After that, flashing starts on your Ziox ZI7 phone. Flashing Method Ziox ZI7 takes 10 to 15 minutes.

5) Please wait until Ziox ZI7 flashing completed. Afterward flashing completed, Your Ziox ZI7 device automatically rebooted. Flashing done on your Ziox ZI7. Finally, remove the device from the PC.

See the other topic: | Apple | | Root | | Unlock | | Rom | | OS |

If this Ziox ZI7 phone Flashing option does not work then flow the others post or find the Ziox ZI7 model-based Flashing method.


Thanks for reading Flashing Method Ziox ZI7

« Prev Post