Feb 4, 2020

Flashing Method Jio f41t

  Admin       Feb 4, 2020
Why the Jio f41t Flashing?

You may upgrade or downgrade the Jio f41t firmware with Flashing Method Jio f41t device. Flashing will fix software issues, IMEI related issues, and improve Jio f41t performance. After Flashing, delete all your Jio f41t data like photos, contacts, and apps, etc.


What is Jio f41t Flashing?

Jio f41t Flashing means removing present stock firmware (Flash File) from Jio f41t device and replace with the same version or any other version. Simply, Jio f41t flashing means changing the OS (operating system). You can flash your Jio f41t with Recovery mode or Flash tool.

Read the two Jio f41t flashing method 1st Recovery Mode and 2nd flashing with Flash Tool. Jio f41t flashing method dependent the what type of flash file use.


1st Method Recovery Mode

You Flashing Jio f41t device without software, don’t need any flash tool or any USB drivers or Computer to flash the firmware of Jio f41t with this method. Just you need a flash file for Jio f41t.

Recovery mode with flashing: Follow these steps to flash Jio f41t stock firmware with recovery mode.

1) First, download the Jio f41t flash file and Move the Firmware to SD card storage (Do not put the file in the Jio f41t folder).

2) Remove SD card from the Jio f41t phone and Power off your Jio f41t, by holding the power button.

3) Hold down the Volume Up + Power Button or Volume Down + Power Button, After that, Release both Buttons for Jio f41t device when you see LOGO appears.

4) you will see the Android exclamation mark to the Jio f41t screen. Now, While holding down the Power key press and release Volume Up key. Navigate with Volume key to select wipe data/factory reset option and press the Power Button for Jio f41t android. see the Hard Reset - Wipe data/factory reset option.

5) Afterward, use the Volume key to select an option YES and press the Power key to confirm. then, select the reboot system now option.

6) Now, insert the sd-card to Jio f41t. then, again go to the recovery mode and select Apply update from SD-card option.

7) Locate the Downloaded Firmware file from SD-card Storage. Afterward, select and Tap on the Firmware and install it to Jio f41t. You have successfully flash the Firmware file.


2nd Method Flashing with Flash Tool

Stock ROM Flashing with software, you need a Computer or Laptop, flash tool, USB drivers with a USB cable, Jio f41t device flash file, and flashing with this method.

All data will be deleted after flashing for Jio f41t, so back up all personal data like photos, apps, and contacts, etc to prevent data loss to the Jio f41t model.



Follow these steps to flash your Jio f41t Android with a flash tool.

1: First, download the flash tool, Jio f41t flash file, and USB drivers on your computer. Then, Install the USB drivers for your Jio f41t phone.

2: Next, launch the Flash tool on your PC. Afterward, switch off your Jio f41t device.

3: Now, press and hold the device Volume Up + Power Button or Volume Down + Power Button key. After that, Connect your Jio f41t to the computer with a USB cable.

4: So, browse the Jio f41t flash file in the flash tool and click on the Download button. After that, flashing starts on your Jio f41t phone. Flashing Method Jio f41t takes 10 to 15 minutes.

5) Please wait until Jio f41t flashing completed. Afterward flashing completed, Your Jio f41t device automatically rebooted. Flashing done on your Jio f41t. Finally, remove the device from the PC.



See the other topic: the Useful, Tech tricks, and tips.


If this Jio f41t phone Flashing option does not work then flow the others post or find the Jio f41t model-based Flashing method.
logoblog

Thanks for reading Flashing Method Jio f41t

Previous
« Prev Post