Feb 6, 2020

Flashing Method Oppo 1201

  Admin       Feb 6, 2020
Why the Oppo 1201 Flashing?

You may upgrade or downgrade the Oppo 1201 firmware with Flashing Method Oppo 1201 device. Flashing will fix software issues, IMEI related issues, and improve Oppo 1201 performance. After Flashing, delete all your Oppo 1201 data like photos, contacts, and apps, etc.

What is Oppo 1201 Flashing?

Oppo 1201 Flashing means removing present stock firmware (Flash File) from Oppo 1201 device and replace with the same version or any other version. Simply, Oppo 1201 flashing means changing the OS (operating system). You can flash your Oppo 1201 with Recovery mode or Flash tool.

Read the two Oppo 1201 flashing method 1st Recovery Mode and 2nd flashing with Flash Tool. Oppo 1201 flashing method dependent the what type of flash file use.

1st Method Recovery Mode

You Flashing Oppo 1201 device without software, don’t need any flash tool or any USB drivers or Computer to flash the firmware of Oppo 1201 with this method. Just you need a flash file for Oppo 1201.

Recovery mode with flashing: Follow these steps to flash Oppo 1201 stock firmware with recovery mode.

1) First, download the Oppo 1201 flash file and Move the Firmware to SD card storage (Do not put the file in the Oppo 1201 folder).

2) Remove SD card from the Oppo 1201 phone and Power off your Oppo 1201, by holding the power button.

3) Hold down the Volume Up + Power Button or Volume Down + Power Button, After that, Release both Buttons for Oppo 1201 device when you see LOGO appears.

4) you will see the Android exclamation mark to the Oppo 1201 screen. Now, While holding down the Power key press and release Volume Up key. Navigate with Volume key to select wipe data/factory reset option and press the Power Button for Oppo 1201 android. see the Hard Reset - Wipe data/factory reset option.

5) Afterward, use the Volume key to select an option YES and press the Power key to confirm. then, select the reboot system now option.

6) Now, insert the sd-card to Oppo 1201. then, again go to the recovery mode and select Apply update from SD-card option.

7) Locate the Downloaded Firmware file from SD-card Storage. Afterward, select and Tap on the Firmware and install it to Oppo 1201. You have successfully flash the Firmware file.

2nd Method Flashing with Flash Tool

Stock ROM Flashing with software, you need a Computer or Laptop, flash tool, USB drivers with a USB cable, Oppo 1201 device flash file, and flashing with this method.

All data will be deleted after flashing for Oppo 1201, so back up all personal data like photos, apps, and contacts, etc to prevent data loss to the Oppo 1201 model.

Follow these steps to flash your Oppo 1201 Android with a flash tool.

1: First, download the flash tool, Oppo 1201 flash file, and USB drivers on your computer. Then, Install the USB drivers for your Oppo 1201 phone.

2: Next, launch the Flash tool on your PC. Afterward, switch off your Oppo 1201 device.

3: Now, press and hold the device Volume Up + Power Button or Volume Down + Power Button key. After that, Connect your Oppo 1201 to the computer with a USB cable.

4: So, browse the Oppo 1201 flash file in the flash tool and click on the Download button. After that, flashing starts on your Oppo 1201 phone. Flashing Method Oppo 1201 takes 10 to 15 minutes.

5) Please wait until Oppo 1201 flashing completed. Afterward flashing completed, Your Oppo 1201 device automatically rebooted. Flashing done on your Oppo 1201. Finally, remove the device from the PC.

See the other topic: the Useful, Tech tricks, and tips.

If this Oppo 1201 phone Flashing option does not work then flow the others post or find the Oppo 1201 model-based Flashing method.

Thanks for reading Flashing Method Oppo 1201

« Prev Post