Feb 6, 2020

Flashing Method Oppo a33f

  Admin       Feb 6, 2020
Why the Oppo a33f Flashing?

You may upgrade or downgrade the Oppo a33f firmware with Flashing Method Oppo a33f device. Flashing will fix software issues, IMEI related issues, and improve Oppo a33f performance. After Flashing, delete all your Oppo a33f data like photos, contacts, and apps, etc.


What is Oppo a33f Flashing?

Oppo a33f Flashing means removing present stock firmware (Flash File) from Oppo a33f device and replace with the same version or any other version. Simply, Oppo a33f flashing means changing the OS (operating system). You can flash your Oppo a33f with Recovery mode or Flash tool.

Read the two Oppo a33f flashing method 1st Recovery Mode and 2nd flashing with Flash Tool. Oppo a33f flashing method dependent the what type of flash file use.


1st Method Recovery Mode

You Flashing Oppo a33f device without software, don’t need any flash tool or any USB drivers or Computer to flash the firmware of Oppo a33f with this method. Just you need a flash file for Oppo a33f.

Recovery mode with flashing: Follow these steps to flash Oppo a33f stock firmware with recovery mode.

1) First, download the Oppo a33f flash file and Move the Firmware to SD card storage (Do not put the file in the Oppo a33f folder).

2) Remove SD card from the Oppo a33f phone and Power off your Oppo a33f, by holding the power button.

3) Hold down the Volume Up + Power Button or Volume Down + Power Button, After that, Release both Buttons for Oppo a33f device when you see LOGO appears.

4) you will see the Android exclamation mark to the Oppo a33f screen. Now, While holding down the Power key press and release Volume Up key. Navigate with Volume key to select wipe data/factory reset option and press the Power Button for Oppo a33f android. see the Hard Reset - Wipe data/factory reset option.

5) Afterward, use the Volume key to select an option YES and press the Power key to confirm. then, select the reboot system now option.

6) Now, insert the sd-card to Oppo a33f. then, again go to the recovery mode and select Apply update from SD-card option.

7) Locate the Downloaded Firmware file from SD-card Storage. Afterward, select and Tap on the Firmware and install it to Oppo a33f. You have successfully flash the Firmware file.


2nd Method Flashing with Flash Tool

Stock ROM Flashing with software, you need a Computer or Laptop, flash tool, USB drivers with a USB cable, Oppo a33f device flash file, and flashing with this method.

All data will be deleted after flashing for Oppo a33f, so back up all personal data like photos, apps, and contacts, etc to prevent data loss to the Oppo a33f model.



Follow these steps to flash your Oppo a33f Android with a flash tool.

1: First, download the flash tool, Oppo a33f flash file, and USB drivers on your computer. Then, Install the USB drivers for your Oppo a33f phone.

2: Next, launch the Flash tool on your PC. Afterward, switch off your Oppo a33f device.

3: Now, press and hold the device Volume Up + Power Button or Volume Down + Power Button key. After that, Connect your Oppo a33f to the computer with a USB cable.

4: So, browse the Oppo a33f flash file in the flash tool and click on the Download button. After that, flashing starts on your Oppo a33f phone. Flashing Method Oppo a33f takes 10 to 15 minutes.

5) Please wait until Oppo a33f flashing completed. Afterward flashing completed, Your Oppo a33f device automatically rebooted. Flashing done on your Oppo a33f. Finally, remove the device from the PC.



See the other topic: the Useful, Tech tricks, and tips.


If this Oppo a33f phone Flashing option does not work then flow the others post or find the Oppo a33f model-based Flashing method.
logoblog

Thanks for reading Flashing Method Oppo a33f

Previous
« Prev Post