Feb 6, 2020

Flashing Method Oppo a3s

  Admin       Feb 6, 2020
Why the Oppo a3s Flashing?

You may upgrade or downgrade the Oppo a3s firmware with Flashing Method Oppo a3s device. Flashing will fix software issues, IMEI related issues, and improve Oppo a3s performance. After Flashing, delete all your Oppo a3s data like photos, contacts, and apps, etc.


What is Oppo a3s Flashing?

Oppo a3s Flashing means removing present stock firmware (Flash File) from Oppo a3s device and replace with the same version or any other version. Simply, Oppo a3s flashing means changing the OS (operating system). You can flash your Oppo a3s with Recovery mode or Flash tool.

Read the two Oppo a3s flashing method 1st Recovery Mode and 2nd flashing with Flash Tool. Oppo a3s flashing method dependent the what type of flash file use.


1st Method Recovery Mode

You Flashing Oppo a3s device without software, don’t need any flash tool or any USB drivers or Computer to flash the firmware of Oppo a3s with this method. Just you need a flash file for Oppo a3s.

Recovery mode with flashing: Follow these steps to flash Oppo a3s stock firmware with recovery mode.

1) First, download the Oppo a3s flash file and Move the Firmware to SD card storage (Do not put the file in the Oppo a3s folder).

2) Remove SD card from the Oppo a3s phone and Power off your Oppo a3s, by holding the power button.

3) Hold down the Volume Up + Power Button or Volume Down + Power Button, After that, Release both Buttons for Oppo a3s device when you see LOGO appears.

4) you will see the Android exclamation mark to the Oppo a3s screen. Now, While holding down the Power key press and release Volume Up key. Navigate with Volume key to select wipe data/factory reset option and press the Power Button for Oppo a3s android. see the Hard Reset - Wipe data/factory reset option.

5) Afterward, use the Volume key to select an option YES and press the Power key to confirm. then, select the reboot system now option.

6) Now, insert the sd-card to Oppo a3s. then, again go to the recovery mode and select Apply update from SD-card option.

7) Locate the Downloaded Firmware file from SD-card Storage. Afterward, select and Tap on the Firmware and install it to Oppo a3s. You have successfully flash the Firmware file.


2nd Method Flashing with Flash Tool

Stock ROM Flashing with software, you need a Computer or Laptop, flash tool, USB drivers with a USB cable, Oppo a3s device flash file, and flashing with this method.

All data will be deleted after flashing for Oppo a3s, so back up all personal data like photos, apps, and contacts, etc to prevent data loss to the Oppo a3s model.



Follow these steps to flash your Oppo a3s Android with a flash tool.

1: First, download the flash tool, Oppo a3s flash file, and USB drivers on your computer. Then, Install the USB drivers for your Oppo a3s phone.

2: Next, launch the Flash tool on your PC. Afterward, switch off your Oppo a3s device.

3: Now, press and hold the device Volume Up + Power Button or Volume Down + Power Button key. After that, Connect your Oppo a3s to the computer with a USB cable.

4: So, browse the Oppo a3s flash file in the flash tool and click on the Download button. After that, flashing starts on your Oppo a3s phone. Flashing Method Oppo a3s takes 10 to 15 minutes.

5) Please wait until Oppo a3s flashing completed. Afterward flashing completed, Your Oppo a3s device automatically rebooted. Flashing done on your Oppo a3s. Finally, remove the device from the PC.



See the other topic: the Useful, Tech tricks, and tips.


If this Oppo a3s phone Flashing option does not work then flow the others post or find the Oppo a3s model-based Flashing method.
logoblog

Thanks for reading Flashing Method Oppo a3s

Previous
« Prev Post