Feb 7, 2020

Flashing Method Oppo cph1801

  Admin       Feb 7, 2020
Why the Oppo cph1801 Flashing?

You may upgrade or downgrade the Oppo cph1801 firmware with Flashing Method Oppo cph1801 device. Flashing will fix software issues, IMEI related issues, and improve Oppo cph1801 performance. After Flashing, delete all your Oppo cph1801 data like photos, contacts, and apps, etc.


What is Oppo cph1801 Flashing?

Oppo cph1801 Flashing means removing present stock firmware (Flash File) from Oppo cph1801 device and replace with the same version or any other version. Simply, Oppo cph1801 flashing means changing the OS (operating system). You can flash your Oppo cph1801 with Recovery mode or Flash tool.

Read the two Oppo cph1801 flashing method 1st Recovery Mode and 2nd flashing with Flash Tool. Oppo cph1801 flashing method dependent the what type of flash file use.


1st Method Recovery Mode

You Flashing Oppo cph1801 device without software, don’t need any flash tool or any USB drivers or Computer to flash the firmware of Oppo cph1801 with this method. Just you need a flash file for Oppo cph1801.

Recovery mode with flashing: Follow these steps to flash Oppo cph1801 stock firmware with recovery mode.

1) First, download the Oppo cph1801 flash file and Move the Firmware to SD card storage (Do not put the file in the Oppo cph1801 folder).

2) Remove SD card from the Oppo cph1801 phone and Power off your Oppo cph1801, by holding the power button.

3) Hold down the Volume Up + Power Button or Volume Down + Power Button, After that, Release both Buttons for Oppo cph1801 device when you see LOGO appears.

4) you will see the Android exclamation mark to the Oppo cph1801 screen. Now, While holding down the Power key press and release Volume Up key. Navigate with Volume key to select wipe data/factory reset option and press the Power Button for Oppo cph1801 android. see the Hard Reset - Wipe data/factory reset option.

5) Afterward, use the Volume key to select an option YES and press the Power key to confirm. then, select the reboot system now option.

6) Now, insert the sd-card to Oppo cph1801. then, again go to the recovery mode and select Apply update from SD-card option.

7) Locate the Downloaded Firmware file from SD-card Storage. Afterward, select and Tap on the Firmware and install it to Oppo cph1801. You have successfully flash the Firmware file.


2nd Method Flashing with Flash Tool

Stock ROM Flashing with software, you need a Computer or Laptop, flash tool, USB drivers with a USB cable, Oppo cph1801 device flash file, and flashing with this method.

All data will be deleted after flashing for Oppo cph1801, so back up all personal data like photos, apps, and contacts, etc to prevent data loss to the Oppo cph1801 model.



Follow these steps to flash your Oppo cph1801 Android with a flash tool.

1: First, download the flash tool, Oppo cph1801 flash file, and USB drivers on your computer. Then, Install the USB drivers for your Oppo cph1801 phone.

2: Next, launch the Flash tool on your PC. Afterward, switch off your Oppo cph1801 device.

3: Now, press and hold the device Volume Up + Power Button or Volume Down + Power Button key. After that, Connect your Oppo cph1801 to the computer with a USB cable.

4: So, browse the Oppo cph1801 flash file in the flash tool and click on the Download button. After that, flashing starts on your Oppo cph1801 phone. Flashing Method Oppo cph1801 takes 10 to 15 minutes.

5) Please wait until Oppo cph1801 flashing completed. Afterward flashing completed, Your Oppo cph1801 device automatically rebooted. Flashing done on your Oppo cph1801. Finally, remove the device from the PC.



See the other topic: the Useful, Tech tricks, and tips.


If this Oppo cph1801 phone Flashing option does not work then flow the others post or find the Oppo cph1801 model-based Flashing method.
logoblog

Thanks for reading Flashing Method Oppo cph1801

Previous
« Prev Post