Feb 6, 2020

Flashing Method Oppo f3 plus

  Admin       Feb 6, 2020
Why the Oppo f3 plus Flashing?

You may upgrade or downgrade the Oppo f3 plus firmware with Flashing Method Oppo f3 plus device. Flashing will fix software issues, IMEI related issues, and improve Oppo f3 plus performance. After Flashing, delete all your Oppo f3 plus data like photos, contacts, and apps, etc.


What is Oppo f3 plus Flashing?

Oppo f3 plus Flashing means removing present stock firmware (Flash File) from Oppo f3 plus device and replace with the same version or any other version. Simply, Oppo f3 plus flashing means changing the OS (operating system). You can flash your Oppo f3 plus with Recovery mode or Flash tool.

Read the two Oppo f3 plus flashing method 1st Recovery Mode and 2nd flashing with Flash Tool. Oppo f3 plus flashing method dependent the what type of flash file use.


1st Method Recovery Mode

You Flashing Oppo f3 plus device without software, don’t need any flash tool or any USB drivers or Computer to flash the firmware of Oppo f3 plus with this method. Just you need a flash file for Oppo f3 plus.

Recovery mode with flashing: Follow these steps to flash Oppo f3 plus stock firmware with recovery mode.

1) First, download the Oppo f3 plus flash file and Move the Firmware to SD card storage (Do not put the file in the Oppo f3 plus folder).

2) Remove SD card from the Oppo f3 plus phone and Power off your Oppo f3 plus, by holding the power button.

3) Hold down the Volume Up + Power Button or Volume Down + Power Button, After that, Release both Buttons for Oppo f3 plus device when you see LOGO appears.

4) you will see the Android exclamation mark to the Oppo f3 plus screen. Now, While holding down the Power key press and release Volume Up key. Navigate with Volume key to select wipe data/factory reset option and press the Power Button for Oppo f3 plus android. see the Hard Reset - Wipe data/factory reset option.

5) Afterward, use the Volume key to select an option YES and press the Power key to confirm. then, select the reboot system now option.

6) Now, insert the sd-card to Oppo f3 plus. then, again go to the recovery mode and select Apply update from SD-card option.

7) Locate the Downloaded Firmware file from SD-card Storage. Afterward, select and Tap on the Firmware and install it to Oppo f3 plus. You have successfully flash the Firmware file.


2nd Method Flashing with Flash Tool

Stock ROM Flashing with software, you need a Computer or Laptop, flash tool, USB drivers with a USB cable, Oppo f3 plus device flash file, and flashing with this method.

All data will be deleted after flashing for Oppo f3 plus, so back up all personal data like photos, apps, and contacts, etc to prevent data loss to the Oppo f3 plus model.



Follow these steps to flash your Oppo f3 plus Android with a flash tool.

1: First, download the flash tool, Oppo f3 plus flash file, and USB drivers on your computer. Then, Install the USB drivers for your Oppo f3 plus phone.

2: Next, launch the Flash tool on your PC. Afterward, switch off your Oppo f3 plus device.

3: Now, press and hold the device Volume Up + Power Button or Volume Down + Power Button key. After that, Connect your Oppo f3 plus to the computer with a USB cable.

4: So, browse the Oppo f3 plus flash file in the flash tool and click on the Download button. After that, flashing starts on your Oppo f3 plus phone. Flashing Method Oppo f3 plus takes 10 to 15 minutes.

5) Please wait until Oppo f3 plus flashing completed. Afterward flashing completed, Your Oppo f3 plus device automatically rebooted. Flashing done on your Oppo f3 plus. Finally, remove the device from the PC.



See the other topic: the Useful, Tech tricks, and tips.


If this Oppo f3 plus phone Flashing option does not work then flow the others post or find the Oppo f3 plus model-based Flashing method.
logoblog

Thanks for reading Flashing Method Oppo f3 plus

Previous
« Prev Post