Feb 7, 2020

Flashing Method Oppo f9 Pro

  Admin       Feb 7, 2020
Why the Oppo f9 Pro Flashing?

You may upgrade or downgrade the Oppo f9 Pro firmware with Flashing Method Oppo f9 Pro device. Flashing will fix software issues, IMEI related issues, and improve Oppo f9 Pro performance. After Flashing, delete all your Oppo f9 Pro data like photos, contacts, and apps, etc.

What is Oppo f9 Pro Flashing?

Oppo f9 Pro Flashing means removing present stock firmware (Flash File) from Oppo f9 Pro device and replace with the same version or any other version. Simply, Oppo f9 Pro flashing means changing the OS (operating system). You can flash your Oppo f9 Pro with Recovery mode or Flash tool.

Read the two Oppo f9 Pro flashing method 1st Recovery Mode and 2nd flashing with Flash Tool. Oppo f9 Pro flashing method dependent the what type of flash file use.

1st Method Recovery Mode

You Flashing Oppo f9 Pro device without software, don’t need any flash tool or any USB drivers or Computer to flash the firmware of Oppo f9 Pro with this method. Just you need a flash file for Oppo f9 Pro.

Recovery mode with flashing: Follow these steps to flash Oppo f9 Pro stock firmware with recovery mode.

1) First, download the Oppo f9 Pro flash file and Move the Firmware to SD card storage (Do not put the file in the Oppo f9 Pro folder).

2) Remove SD card from the Oppo f9 Pro phone and Power off your Oppo f9 Pro, by holding the power button.

3) Hold down the Volume Up + Power Button or Volume Down + Power Button, After that, Release both Buttons for Oppo f9 Pro device when you see LOGO appears.

4) you will see the Android exclamation mark to the Oppo f9 Pro screen. Now, While holding down the Power key press and release Volume Up key. Navigate with Volume key to select wipe data/factory reset option and press the Power Button for Oppo f9 Pro android. see the Hard Reset - Wipe data/factory reset option.

5) Afterward, use the Volume key to select an option YES and press the Power key to confirm. then, select the reboot system now option.

6) Now, insert the sd-card to Oppo f9 Pro. then, again go to the recovery mode and select Apply update from SD-card option.

7) Locate the Downloaded Firmware file from SD-card Storage. Afterward, select and Tap on the Firmware and install it to Oppo f9 Pro. You have successfully flash the Firmware file.

2nd Method Flashing with Flash Tool

Stock ROM Flashing with software, you need a Computer or Laptop, flash tool, USB drivers with a USB cable, Oppo f9 Pro device flash file, and flashing with this method.

All data will be deleted after flashing for Oppo f9 Pro, so back up all personal data like photos, apps, and contacts, etc to prevent data loss to the Oppo f9 Pro model.

Follow these steps to flash your Oppo f9 Pro Android with a flash tool.

1: First, download the flash tool, Oppo f9 Pro flash file, and USB drivers on your computer. Then, Install the USB drivers for your Oppo f9 Pro phone.

2: Next, launch the Flash tool on your PC. Afterward, switch off your Oppo f9 Pro device.

3: Now, press and hold the device Volume Up + Power Button or Volume Down + Power Button key. After that, Connect your Oppo f9 Pro to the computer with a USB cable.

4: So, browse the Oppo f9 Pro flash file in the flash tool and click on the Download button. After that, flashing starts on your Oppo f9 Pro phone. Flashing Method Oppo f9 Pro takes 10 to 15 minutes.

5) Please wait until Oppo f9 Pro flashing completed. Afterward flashing completed, Your Oppo f9 Pro device automatically rebooted. Flashing done on your Oppo f9 Pro. Finally, remove the device from the PC.

See the other topic: the Useful, Tech tricks, and tips.

If this Oppo f9 Pro phone Flashing option does not work then flow the others post or find the Oppo f9 Pro model-based Flashing method.

Thanks for reading Flashing Method Oppo f9 Pro

« Prev Post