Feb 7, 2020

Flashing Method Oppo r1001

  Admin       Feb 7, 2020
Why the Oppo r1001 Flashing?

You may upgrade or downgrade the Oppo r1001 firmware with Flashing Method Oppo r1001 device. Flashing will fix software issues, IMEI related issues, and improve Oppo r1001 performance. After Flashing, delete all your Oppo r1001 data like photos, contacts, and apps, etc.


What is Oppo r1001 Flashing?

Oppo r1001 Flashing means removing present stock firmware (Flash File) from Oppo r1001 device and replace with the same version or any other version. Simply, Oppo r1001 flashing means changing the OS (operating system). You can flash your Oppo r1001 with Recovery mode or Flash tool.

Read the two Oppo r1001 flashing method 1st Recovery Mode and 2nd flashing with Flash Tool. Oppo r1001 flashing method dependent the what type of flash file use.


1st Method Recovery Mode

You Flashing Oppo r1001 device without software, don’t need any flash tool or any USB drivers or Computer to flash the firmware of Oppo r1001 with this method. Just you need a flash file for Oppo r1001.

Recovery mode with flashing: Follow these steps to flash Oppo r1001 stock firmware with recovery mode.

1) First, download the Oppo r1001 flash file and Move the Firmware to SD card storage (Do not put the file in the Oppo r1001 folder).

2) Remove SD card from the Oppo r1001 phone and Power off your Oppo r1001, by holding the power button.

3) Hold down the Volume Up + Power Button or Volume Down + Power Button, After that, Release both Buttons for Oppo r1001 device when you see LOGO appears.

4) you will see the Android exclamation mark to the Oppo r1001 screen. Now, While holding down the Power key press and release Volume Up key. Navigate with Volume key to select wipe data/factory reset option and press the Power Button for Oppo r1001 android. see the Hard Reset - Wipe data/factory reset option.

5) Afterward, use the Volume key to select an option YES and press the Power key to confirm. then, select the reboot system now option.

6) Now, insert the sd-card to Oppo r1001. then, again go to the recovery mode and select Apply update from SD-card option.

7) Locate the Downloaded Firmware file from SD-card Storage. Afterward, select and Tap on the Firmware and install it to Oppo r1001. You have successfully flash the Firmware file.


2nd Method Flashing with Flash Tool

Stock ROM Flashing with software, you need a Computer or Laptop, flash tool, USB drivers with a USB cable, Oppo r1001 device flash file, and flashing with this method.

All data will be deleted after flashing for Oppo r1001, so back up all personal data like photos, apps, and contacts, etc to prevent data loss to the Oppo r1001 model.



Follow these steps to flash your Oppo r1001 Android with a flash tool.

1: First, download the flash tool, Oppo r1001 flash file, and USB drivers on your computer. Then, Install the USB drivers for your Oppo r1001 phone.

2: Next, launch the Flash tool on your PC. Afterward, switch off your Oppo r1001 device.

3: Now, press and hold the device Volume Up + Power Button or Volume Down + Power Button key. After that, Connect your Oppo r1001 to the computer with a USB cable.

4: So, browse the Oppo r1001 flash file in the flash tool and click on the Download button. After that, flashing starts on your Oppo r1001 phone. Flashing Method Oppo r1001 takes 10 to 15 minutes.

5) Please wait until Oppo r1001 flashing completed. Afterward flashing completed, Your Oppo r1001 device automatically rebooted. Flashing done on your Oppo r1001. Finally, remove the device from the PC.



See the other topic: the Useful, Tech tricks, and tips.


If this Oppo r1001 phone Flashing option does not work then flow the others post or find the Oppo r1001 model-based Flashing method.
logoblog

Thanks for reading Flashing Method Oppo r1001

Previous
« Prev Post