Feb 9, 2020

Flashing Method Realme 3

  Admin       Feb 9, 2020
Why the Realme 3 Flashing?

You may upgrade or downgrade the Realme 3 firmware with Flashing Method Realme 3 device. Flashing will fix software issues, IMEI related issues, and improve Realme 3 performance. After Flashing, delete all your Realme 3 data like photos, contacts, and apps, etc.

What is Realme 3 Flashing?

Realme 3 Flashing means removing present stock firmware (Flash File) from Realme 3 device and replace with the same version or any other version. Simply, Realme 3 flashing means changing the OS (operating system). You can flash your Realme 3 with Recovery mode or Flash tool.

Read the two Realme 3 flashing method 1st Recovery Mode and 2nd flashing with Flash Tool. Realme 3 flashing method dependent the what type of flash file use.

1st Method Recovery Mode

You Flashing Realme 3 device without software, don’t need any flash tool or any USB drivers or Computer to flash the firmware of Realme 3 with this method. Just you need a flash file for Realme 3.

Recovery mode with flashing: Follow these steps to flash Realme 3 stock firmware with recovery mode.

1) First, download the Realme 3 flash file and Move the Firmware to SD card storage (Do not put the file in the Realme 3 folder).

2) Remove SD card from the Realme 3 phone and Power off your Realme 3, by holding the power button.

3) Hold down the Volume Up + Power Button or Volume Down + Power Button, After that, Release both Buttons for Realme 3 device when you see LOGO appears.

4) you will see the Android exclamation mark to the Realme 3 screen. Now, While holding down the Power key press and release Volume Up key. Navigate with Volume key to select wipe data/factory reset option and press the Power Button for Realme 3 android. see the Hard Reset - Wipe data/factory reset option.

5) Afterward, use the Volume key to select an option YES and press the Power key to confirm. then, select the reboot system now option.

6) Now, insert the sd-card to Realme 3. then, again go to the recovery mode and select Apply update from SD-card option.

7) Locate the Downloaded Firmware file from SD-card Storage. Afterward, select and Tap on the Firmware and install it to Realme 3. You have successfully flash the Firmware file.

2nd Method Flashing with Flash Tool

Stock ROM Flashing with software, you need a Computer or Laptop, flash tool, USB drivers with a USB cable, Realme 3 device flash file, and flashing with this method.

All data will be deleted after flashing for Realme 3, so back up all personal data like photos, apps, and contacts, etc to prevent data loss to the Realme 3 model.

Follow these steps to flash your Realme 3 Android with a flash tool.

1: First, download the flash tool, Realme 3 flash file, and USB drivers on your computer. Then, Install the USB drivers for your Realme 3 phone.

2: Next, launch the Flash tool on your PC. Afterward, switch off your Realme 3 device.

3: Now, press and hold the device Volume Up + Power Button or Volume Down + Power Button key. After that, Connect your Realme 3 to the computer with a USB cable.

4: So, browse the Realme 3 flash file in the flash tool and click on the Download button. After that, flashing starts on your Realme 3 phone. Flashing Method Realme 3 takes 10 to 15 minutes.

5) Please wait until Realme 3 flashing completed. Afterward flashing completed, Your Realme 3 device automatically rebooted. Flashing done on your Realme 3. Finally, remove the device from the PC.

See the other topic: the Useful, Tech tricks, and tips.

If this Realme 3 phone Flashing option does not work then flow the others post or find the Realme 3 model-based Flashing method.

Thanks for reading Flashing Method Realme 3

« Prev Post