Feb 9, 2020

Flashing Method Realme u1

  Admin       Feb 9, 2020
Why the Realme u1 Flashing?

You may upgrade or downgrade the Realme u1 firmware with Flashing Method Realme u1 device. Flashing will fix software issues, IMEI related issues, and improve Realme u1 performance. After Flashing, delete all your Realme u1 data like photos, contacts, and apps, etc.


What is Realme u1 Flashing?

Realme u1 Flashing means removing present stock firmware (Flash File) from Realme u1 device and replace with the same version or any other version. Simply, Realme u1 flashing means changing the OS (operating system). You can flash your Realme u1 with Recovery mode or Flash tool.

Read the two Realme u1 flashing method 1st Recovery Mode and 2nd flashing with Flash Tool. Realme u1 flashing method dependent the what type of flash file use.


1st Method Recovery Mode

You Flashing Realme u1 device without software, don’t need any flash tool or any USB drivers or Computer to flash the firmware of Realme u1 with this method. Just you need a flash file for Realme u1.

Recovery mode with flashing: Follow these steps to flash Realme u1 stock firmware with recovery mode.

1) First, download the Realme u1 flash file and Move the Firmware to SD card storage (Do not put the file in the Realme u1 folder).

2) Remove SD card from the Realme u1 phone and Power off your Realme u1, by holding the power button.

3) Hold down the Volume Up + Power Button or Volume Down + Power Button, After that, Release both Buttons for Realme u1 device when you see LOGO appears.

4) you will see the Android exclamation mark to the Realme u1 screen. Now, While holding down the Power key press and release Volume Up key. Navigate with Volume key to select wipe data/factory reset option and press the Power Button for Realme u1 android. see the Hard Reset - Wipe data/factory reset option.

5) Afterward, use the Volume key to select an option YES and press the Power key to confirm. then, select the reboot system now option.

6) Now, insert the sd-card to Realme u1. then, again go to the recovery mode and select Apply update from SD-card option.

7) Locate the Downloaded Firmware file from SD-card Storage. Afterward, select and Tap on the Firmware and install it to Realme u1. You have successfully flash the Firmware file.


2nd Method Flashing with Flash Tool

Stock ROM Flashing with software, you need a Computer or Laptop, flash tool, USB drivers with a USB cable, Realme u1 device flash file, and flashing with this method.

All data will be deleted after flashing for Realme u1, so back up all personal data like photos, apps, and contacts, etc to prevent data loss to the Realme u1 model.



Follow these steps to flash your Realme u1 Android with a flash tool.

1: First, download the flash tool, Realme u1 flash file, and USB drivers on your computer. Then, Install the USB drivers for your Realme u1 phone.

2: Next, launch the Flash tool on your PC. Afterward, switch off your Realme u1 device.

3: Now, press and hold the device Volume Up + Power Button or Volume Down + Power Button key. After that, Connect your Realme u1 to the computer with a USB cable.

4: So, browse the Realme u1 flash file in the flash tool and click on the Download button. After that, flashing starts on your Realme u1 phone. Flashing Method Realme u1 takes 10 to 15 minutes.

5) Please wait until Realme u1 flashing completed. Afterward flashing completed, Your Realme u1 device automatically rebooted. Flashing done on your Realme u1. Finally, remove the device from the PC.



See the other topic: the Useful, Tech tricks, and tips.


If this Realme u1 phone Flashing option does not work then flow the others post or find the Realme u1 model-based Flashing method.
logoblog

Thanks for reading Flashing Method Realme u1

Previous
« Prev Post