Feb 10, 2020

Flashing Method Xiaomi mi 3s

  Admin       Feb 10, 2020
Why the Xiaomi mi 3s Flashing?

You may upgrade or downgrade the Xiaomi mi 3s firmware with Flashing Method Xiaomi mi 3s device. Flashing will fix software issues, IMEI related issues, and improve Xiaomi mi 3s performance. After Flashing, delete all your Xiaomi mi 3s data like photos, contacts, and apps, etc.

What is Xiaomi mi 3s Flashing?

Xiaomi mi 3s Flashing means removing present stock firmware (Flash File) from Xiaomi mi 3s device and replace with the same version or any other version. Simply, Xiaomi mi 3s flashing means changing the OS (operating system). You can flash your Xiaomi mi 3s with Recovery mode or Flash tool.

Read the two Xiaomi mi 3s flashing method 1st Recovery Mode and 2nd flashing with Flash Tool. Xiaomi mi 3s flashing method dependent the what type of flash file use.

1st Method Recovery Mode

You Flashing Xiaomi mi 3s device without software, don’t need any flash tool or any USB drivers or Computer to flash the firmware of Xiaomi mi 3s with this method. Just you need a flash file for Xiaomi mi 3s.

Recovery mode with flashing: Follow these steps to flash Xiaomi mi 3s stock firmware with recovery mode.

1) First, download the Xiaomi mi 3s flash file and Move the Firmware to SD card storage (Do not put the file in the Xiaomi mi 3s folder).

2) Remove SD card from the Xiaomi mi 3s phone and Power off your Xiaomi mi 3s, by holding the power button.

3) Hold down the Volume Up + Power Button or Volume Down + Power Button, After that, Release both Buttons for Xiaomi mi 3s device when you see LOGO appears.

4) you will see the Android exclamation mark to the Xiaomi mi 3s screen. Now, While holding down the Power key press and release Volume Up key. Navigate with Volume key to select wipe data/factory reset option and press the Power Button for Xiaomi mi 3s android. see the Hard Reset - Wipe data/factory reset option.

5) Afterward, use the Volume key to select an option YES and press the Power key to confirm. then, select the reboot system now option.

6) Now, insert the sd-card to Xiaomi mi 3s. then, again go to the recovery mode and select Apply update from SD-card option.

7) Locate the Downloaded Firmware file from SD-card Storage. Afterward, select and Tap on the Firmware and install it to Xiaomi mi 3s. You have successfully flash the Firmware file.

2nd Method Flashing with Flash Tool

Stock ROM Flashing with software, you need a Computer or Laptop, flash tool, USB drivers with a USB cable, Xiaomi mi 3s device flash file, and flashing with this method.

All data will be deleted after flashing for Xiaomi mi 3s, so back up all personal data like photos, apps, and contacts, etc to prevent data loss to the Xiaomi mi 3s model.

Follow these steps to flash your Xiaomi mi 3s Android with a flash tool.

1: First, download the flash tool, Xiaomi mi 3s flash file, and USB drivers on your computer. Then, Install the USB drivers for your Xiaomi mi 3s phone.

2: Next, launch the Flash tool on your PC. Afterward, switch off your Xiaomi mi 3s device.

3: Now, press and hold the device Volume Up + Power Button or Volume Down + Power Button key. After that, Connect your Xiaomi mi 3s to the computer with a USB cable.

4: So, browse the Xiaomi mi 3s flash file in the flash tool and click on the Download button. After that, flashing starts on your Xiaomi mi 3s phone. Flashing Method Xiaomi mi 3s takes 10 to 15 minutes.

5) Please wait until Xiaomi mi 3s flashing completed. Afterward flashing completed, Your Xiaomi mi 3s device automatically rebooted. Flashing done on your Xiaomi mi 3s. Finally, remove the device from the PC.

See the other topic: the Useful, Tech tricks, and tips.

If this Xiaomi mi 3s phone Flashing option does not work then flow the others post or find the Xiaomi mi 3s model-based Flashing method.

Thanks for reading Flashing Method Xiaomi mi 3s

« Prev Post