Feb 11, 2020

Flashing Method Xiaomi mi 6

  Admin       Feb 11, 2020
Why the Xiaomi mi 6 Flashing?

You may upgrade or downgrade the Xiaomi mi 6 firmware with Flashing Method Xiaomi mi 6 device. Flashing will fix software issues, IMEI related issues, and improve Xiaomi mi 6 performance. After Flashing, delete all your Xiaomi mi 6 data like photos, contacts, and apps, etc.

What is Xiaomi mi 6 Flashing?

Xiaomi mi 6 Flashing means removing present stock firmware (Flash File) from Xiaomi mi 6 device and replace with the same version or any other version. Simply, Xiaomi mi 6 flashing means changing the OS (operating system). You can flash your Xiaomi mi 6 with Recovery mode or Flash tool.

Read the two Xiaomi mi 6 flashing method 1st Recovery Mode and 2nd flashing with Flash Tool. Xiaomi mi 6 flashing method dependent the what type of flash file use.

1st Method Recovery Mode

You Flashing Xiaomi mi 6 device without software, don’t need any flash tool or any USB drivers or Computer to flash the firmware of Xiaomi mi 6 with this method. Just you need a flash file for Xiaomi mi 6.

Recovery mode with flashing: Follow these steps to flash Xiaomi mi 6 stock firmware with recovery mode.

1) First, download the Xiaomi mi 6 flash file and Move the Firmware to SD card storage (Do not put the file in the Xiaomi mi 6 folder).

2) Remove SD card from the Xiaomi mi 6 phone and Power off your Xiaomi mi 6, by holding the power button.

3) Hold down the Volume Up + Power Button or Volume Down + Power Button, After that, Release both Buttons for Xiaomi mi 6 device when you see LOGO appears.

4) you will see the Android exclamation mark to the Xiaomi mi 6 screen. Now, While holding down the Power key press and release Volume Up key. Navigate with Volume key to select wipe data/factory reset option and press the Power Button for Xiaomi mi 6 android. see the Hard Reset - Wipe data/factory reset option.

5) Afterward, use the Volume key to select an option YES and press the Power key to confirm. then, select the reboot system now option.

6) Now, insert the sd-card to Xiaomi mi 6. then, again go to the recovery mode and select Apply update from SD-card option.

7) Locate the Downloaded Firmware file from SD-card Storage. Afterward, select and Tap on the Firmware and install it to Xiaomi mi 6. You have successfully flash the Firmware file.

2nd Method Flashing with Flash Tool

Stock ROM Flashing with software, you need a Computer or Laptop, flash tool, USB drivers with a USB cable, Xiaomi mi 6 device flash file, and flashing with this method.

All data will be deleted after flashing for Xiaomi mi 6, so back up all personal data like photos, apps, and contacts, etc to prevent data loss to the Xiaomi mi 6 model.

Follow these steps to flash your Xiaomi mi 6 Android with a flash tool.

1: First, download the flash tool, Xiaomi mi 6 flash file, and USB drivers on your computer. Then, Install the USB drivers for your Xiaomi mi 6 phone.

2: Next, launch the Flash tool on your PC. Afterward, switch off your Xiaomi mi 6 device.

3: Now, press and hold the device Volume Up + Power Button or Volume Down + Power Button key. After that, Connect your Xiaomi mi 6 to the computer with a USB cable.

4: So, browse the Xiaomi mi 6 flash file in the flash tool and click on the Download button. After that, flashing starts on your Xiaomi mi 6 phone. Flashing Method Xiaomi mi 6 takes 10 to 15 minutes.

5) Please wait until Xiaomi mi 6 flashing completed. Afterward flashing completed, Your Xiaomi mi 6 device automatically rebooted. Flashing done on your Xiaomi mi 6. Finally, remove the device from the PC.

See the other topic: the Useful, Tech tricks, and tips.

If this Xiaomi mi 6 phone Flashing option does not work then flow the others post or find the Xiaomi mi 6 model-based Flashing method.

Thanks for reading Flashing Method Xiaomi mi 6

« Prev Post