Feb 10, 2020

Flashing Method Xiaomi mi 6a

  Admin       Feb 10, 2020
Why the Xiaomi mi 6a Flashing?

You may upgrade or downgrade the Xiaomi mi 6a firmware with Flashing Method Xiaomi mi 6a device. Flashing will fix software issues, IMEI related issues, and improve Xiaomi mi 6a performance. After Flashing, delete all your Xiaomi mi 6a data like photos, contacts, and apps, etc.

What is Xiaomi mi 6a Flashing?

Xiaomi mi 6a Flashing means removing present stock firmware (Flash File) from Xiaomi mi 6a device and replace with the same version or any other version. Simply, Xiaomi mi 6a flashing means changing the OS (operating system). You can flash your Xiaomi mi 6a with Recovery mode or Flash tool.

Read the two Xiaomi mi 6a flashing method 1st Recovery Mode and 2nd flashing with Flash Tool. Xiaomi mi 6a flashing method dependent the what type of flash file use.

1st Method Recovery Mode

You Flashing Xiaomi mi 6a device without software, don’t need any flash tool or any USB drivers or Computer to flash the firmware of Xiaomi mi 6a with this method. Just you need a flash file for Xiaomi mi 6a.

Recovery mode with flashing: Follow these steps to flash Xiaomi mi 6a stock firmware with recovery mode.

1) First, download the Xiaomi mi 6a flash file and Move the Firmware to SD card storage (Do not put the file in the Xiaomi mi 6a folder).

2) Remove SD card from the Xiaomi mi 6a phone and Power off your Xiaomi mi 6a, by holding the power button.

3) Hold down the Volume Up + Power Button or Volume Down + Power Button, After that, Release both Buttons for Xiaomi mi 6a device when you see LOGO appears.

4) you will see the Android exclamation mark to the Xiaomi mi 6a screen. Now, While holding down the Power key press and release Volume Up key. Navigate with Volume key to select wipe data/factory reset option and press the Power Button for Xiaomi mi 6a android. see the Hard Reset - Wipe data/factory reset option.

5) Afterward, use the Volume key to select an option YES and press the Power key to confirm. then, select the reboot system now option.

6) Now, insert the sd-card to Xiaomi mi 6a. then, again go to the recovery mode and select Apply update from SD-card option.

7) Locate the Downloaded Firmware file from SD-card Storage. Afterward, select and Tap on the Firmware and install it to Xiaomi mi 6a. You have successfully flash the Firmware file.

2nd Method Flashing with Flash Tool

Stock ROM Flashing with software, you need a Computer or Laptop, flash tool, USB drivers with a USB cable, Xiaomi mi 6a device flash file, and flashing with this method.

All data will be deleted after flashing for Xiaomi mi 6a, so back up all personal data like photos, apps, and contacts, etc to prevent data loss to the Xiaomi mi 6a model.

Follow these steps to flash your Xiaomi mi 6a Android with a flash tool.

1: First, download the flash tool, Xiaomi mi 6a flash file, and USB drivers on your computer. Then, Install the USB drivers for your Xiaomi mi 6a phone.

2: Next, launch the Flash tool on your PC. Afterward, switch off your Xiaomi mi 6a device.

3: Now, press and hold the device Volume Up + Power Button or Volume Down + Power Button key. After that, Connect your Xiaomi mi 6a to the computer with a USB cable.

4: So, browse the Xiaomi mi 6a flash file in the flash tool and click on the Download button. After that, flashing starts on your Xiaomi mi 6a phone. Flashing Method Xiaomi mi 6a takes 10 to 15 minutes.

5) Please wait until Xiaomi mi 6a flashing completed. Afterward flashing completed, Your Xiaomi mi 6a device automatically rebooted. Flashing done on your Xiaomi mi 6a. Finally, remove the device from the PC.

See the other topic: the Useful, Tech tricks, and tips.

If this Xiaomi mi 6a phone Flashing option does not work then flow the others post or find the Xiaomi mi 6a model-based Flashing method.

Thanks for reading Flashing Method Xiaomi mi 6a

« Prev Post