Feb 12, 2020

Flashing Method Xiaomi mi max 2

  Admin       Feb 12, 2020
Why the Xiaomi mi max 2 Flashing?

You may upgrade or downgrade the Xiaomi mi max 2 firmware with Flashing Method Xiaomi mi max 2 device. Flashing will fix software issues, IMEI related issues, and improve Xiaomi mi max 2 performance. After Flashing, delete all your Xiaomi mi max 2 data like photos, contacts, and apps, etc.


What is Xiaomi mi max 2 Flashing?

Xiaomi mi max 2 Flashing means removing present stock firmware (Flash File) from Xiaomi mi max 2 device and replace with the same version or any other version. Simply, Xiaomi mi max 2 flashing means changing the OS (operating system). You can flash your Xiaomi mi max 2 with Recovery mode or Flash tool.

Read the two Xiaomi mi max 2 flashing method 1st Recovery Mode and 2nd flashing with Flash Tool. Xiaomi mi max 2 flashing method dependent the what type of flash file use.


1st Method Recovery Mode

You Flashing Xiaomi mi max 2 device without software, don’t need any flash tool or any USB drivers or Computer to flash the firmware of Xiaomi mi max 2 with this method. Just you need a flash file for Xiaomi mi max 2.

Recovery mode with flashing: Follow these steps to flash Xiaomi mi max 2 stock firmware with recovery mode.

1) First, download the Xiaomi mi max 2 flash file and Move the Firmware to SD card storage (Do not put the file in the Xiaomi mi max 2 folder).

2) Remove SD card from the Xiaomi mi max 2 phone and Power off your Xiaomi mi max 2, by holding the power button.

3) Hold down the Volume Up + Power Button or Volume Down + Power Button, After that, Release both Buttons for Xiaomi mi max 2 device when you see LOGO appears.

4) you will see the Android exclamation mark to the Xiaomi mi max 2 screen. Now, While holding down the Power key press and release Volume Up key. Navigate with Volume key to select wipe data/factory reset option and press the Power Button for Xiaomi mi max 2 android. see the Hard Reset - Wipe data/factory reset option.

5) Afterward, use the Volume key to select an option YES and press the Power key to confirm. then, select the reboot system now option.

6) Now, insert the sd-card to Xiaomi mi max 2. then, again go to the recovery mode and select Apply update from SD-card option.

7) Locate the Downloaded Firmware file from SD-card Storage. Afterward, select and Tap on the Firmware and install it to Xiaomi mi max 2. You have successfully flash the Firmware file.


2nd Method Flashing with Flash Tool

Stock ROM Flashing with software, you need a Computer or Laptop, flash tool, USB drivers with a USB cable, Xiaomi mi max 2 device flash file, and flashing with this method.

All data will be deleted after flashing for Xiaomi mi max 2, so back up all personal data like photos, apps, and contacts, etc to prevent data loss to the Xiaomi mi max 2 model.



Follow these steps to flash your Xiaomi mi max 2 Android with a flash tool.

1: First, download the flash tool, Xiaomi mi max 2 flash file, and USB drivers on your computer. Then, Install the USB drivers for your Xiaomi mi max 2 phone.

2: Next, launch the Flash tool on your PC. Afterward, switch off your Xiaomi mi max 2 device.

3: Now, press and hold the device Volume Up + Power Button or Volume Down + Power Button key. After that, Connect your Xiaomi mi max 2 to the computer with a USB cable.

4: So, browse the Xiaomi mi max 2 flash file in the flash tool and click on the Download button. After that, flashing starts on your Xiaomi mi max 2 phone. Flashing Method Xiaomi mi max 2 takes 10 to 15 minutes.

5) Please wait until Xiaomi mi max 2 flashing completed. Afterward flashing completed, Your Xiaomi mi max 2 device automatically rebooted. Flashing done on your Xiaomi mi max 2. Finally, remove the device from the PC.



See the other topic: the Useful, Tech tricks, and tips.


If this Xiaomi mi max 2 phone Flashing option does not work then flow the others post or find the Xiaomi mi max 2 model-based Flashing method.
logoblog

Thanks for reading Flashing Method Xiaomi mi max 2

Previous
« Prev Post